Forklift Training Schools Victoria

Forklift Training Schools Victoria - The Advantages Of Taking One Of Our Forklift Training Schools

Are you searching for a job as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in types of lift trucks, pre-shift inspection, fuel kinds and handling of fuels, and safe utilization of a forklift. Practical, hands-on training helps people participating in obtaining essential operational skills. Course content covers current regulations governing the operation of lift trucks. Our proven forklift Schools are meant to offer training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

While the forklift is in operation, do not lower or raise the forks. Loads must not extend above the backrest. This is because of the danger of the load sliding back in the direction of the operator. Check for overhead obstructions and ensure there is adequate clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

While the load is lifted the forklift will be less steady. Make sure that no pedestrians cross underneath the elevated fork. The operator must not leave the lift truck while the load is lifted.

The forks must be level when handling pallets, and high enough to extend all the way into and under the load. The width of the forks should provide equal weight distribution.

Chock the wheels and set the brakes before unloading and loading the truck. The floors must be strong enough to support the combined weight of the load and the forklift. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the forklift height by at least 5 cm. Edges of docks, rail cars and ramps must be marked and avoid them.

Click to Download the pdf