Forklift Training Program Victoria

Forklift Training Program Victoria - Lift trucks are sometimes referred to as hi los, lift trucks or jitneys. These powered industrial trucks are utilized widely today. Department stores used forklifts to be able to unload merchandise from trailers. Warehouses need them for tiering product. And grocery stores utilize small models to drop stock in the aisles. Whether transporting lumber at a sawmill or loading material at a construction site, operators of forklifts should be properly trained and certified. The priority should be on pedestrian and worker safety. This forklift training course teaches the safety and health regulations governing forklifts in order to ensure their efficient and safe use.

Forklift Training Program Safety Tips:

Right training guarantees that forklift operators can maintain control of the forklift throughout lifting, tilting and traveling. Just trained operators should operate a forklift.

When the forklift is in use; head, arms, hands, feet and legs should be kept inside the forklift. Lift truck forks must be kept low to the ground while being slightly tilted back. Observe traffic signs which are posted. Honk the horn and reduce speed when taking a corner. If the vision of the driver is blocked by the load, drive backwards slowly. Pre-check the ground for potential dangers, like objects, wet or oily spots, rough patches, holes, vehicles and people. Prevent sudden stops.

When a vehicle or a person crosses the blind spots of the lift truck, stop the truck, lower the load, and do not continue until the path is clear. If traveling on an incline, the forks must be pointed uphill with a load and downhill without a load. The forklift should just be turned around if on level ground.

Safety tips while steering - When traveling at good speeds, never turn the steering wheel sharply. Support the load with the front wheels and turn using the back wheels. An overloaded truck will be hard to steer. Follow load limitations. Never add a counterweight in order to improve steering.

Safety tips when loading - Follow the recommended capacity and load limitations of the forklift. This information is displayed on the data plate. Always ensure that the load is positioned according to the suggested load centre. The lift truck would remain stable so long as the load is kept near the front wheels.

Before inserting the forks into the pallet, the mast of the forklift should be in an upright position. Level the forks prior to inserting them.

Click to Download the pdf